Glenn's Space

When you roll over taskbar icons in Windows Vista and in Windows 7, little previews appear. The standard delay time for these previews if 400 ms (milliseconds, quite fast), or just under half a second. If this is too slow or too fast for you, of course you can adjust such delay time with an easy Registry Hack.

1. Open the Registry Editor and go to HKEY_CURRENT_USER > Software > Micorosoft > Windows > CurrentVersion > Explorer > Advanced.

note: to open registry editor, go to START>RUN> and enter "REGEDIT" without quotes.

2. Right-click on the right pane and click NEW > DWORD (32-bit) value. Name the new DWORD "ExtendedUIHoverTime".

3. Double-click on ExtendedUIHoverTime to open it. Under "Base", click Decimal and then enter in the delay time (in milliseconds) in the "value data" filed. Click OK to set the time (default is 400 milliseconds).

4. Log off and then log back in for the change to take effect.

so that is it!
Stay tune for other Registry Hacks to make your PC Faster.
Yum yum! XD

additional tags: Registry hacks, 6 registry hacks by sarah jacobsson Purewal, original article from srah jp, free registry hacks, how to hack your registry, make windows faster, windows 7 hacks, windows vista hacks, registry hacks for windows, windows 7 registry hacks, make your windows vista faster

Sharing is so Easy:

SSL Error You say? You can see in your address bar the annoying HTTPS:// thing before the facebook. Errr. You have tried everything that different website suggest, yet it still appears on your face. lol.

THIS IS THE $!@#$!@$! ERROR

Sharing is so Easy:

Dual Channel Interleaved and Single Channel Asymmetric Mode EXPLAINED!


• Dual channel (Interleaved) mode. This mode offers the highest throughput for real world applications. Dual channel mode is enabled when the installed memory capacities of both DIMM channels are equal. Technology and device width can vary from one channel to the other but the installed memory capacity for each channel must be equal. If different speed DIMMs are used between channels, the slowest memory timing will be used.
• Single channel (Asymmetric) mode. This mode is equivalent to single channel bandwidth operation for real world applications. This mode is used when only a single DIMM is installed or the memory capacities are unequal. Technology and device width can vary from one channel to the other. If different speed DIMMs are used between channels, the slowest memory timing will be used.

The following graphics illustrate the memory channel and DIMM configuration.

Note: The DIMM0 sockets of both channels are blue. The DIMM1 sockets of both channels are black.

• Dual Channel (Interleaved) Mode Configurations

This graphic shows a dual channel configuration using two DIMMs. In this example, the DIMM0 (blue) sockets of both channels are populated with identical DIMMs.

Dual Channel (Interleaved) Mode Configuration with Two DIMMs 



This graphic shows a dual channel configuration using three DIMMs. In this example, the combined capacity of the two DIMMs in Channel A equal the capacity of the single DIMM in the DIMM0 (blue) socket of Channel B.

Dual Channel (Interleaved) Mode Configuration with Three DIMMs



This graphic shows a dual channel configuration using four DIMMs. In this example, the combined capacity of the two DIMMs in Channel A equal the combined capacity of the two DIMMs in Channel B. Also, the DIMMs are matched between DIMM0 and DIMM1 of both channels.

Dual Channel (Interleaved) Mode Configuration with Four DIMMs



• Single Channel (Asymmetric) Mode Configurations

This graphic shows a single channel configuration using one DIMM. In this example, only the DIMM0 (blue) socket of Channel A is populated. Channel B is not populated.

Single Channel (Asymmetric) Mode Configuration with One DIMM



This graphic shows a single channel configuration using three DIMMs. In this example, the combined capacity of the two DIMMs in Channel A does not equal the capacity of the single DIMM in the DIMM0 (blue) socket of Channel B.

Single Channel (Asymmetric) Mode Configuration with Three DIMMs



source

Sharing is so Easy:

Palaging Trending ang simsimi screenshots ngayon sa facebook. Do not correct me if I am wrong ha, pero mas nauna kay simsimi ang Cleverbot (www.cleverbot.com). Ang cool lang kay simsimi compared kay cleverbot ay ang graphics nito. At mas maraming nakastore na tagalog phrases/sentences sa database ni simsimi dahil nga sa patuloy itong ginagamit.

Sharing is so Easy:

You don't have to download cracks from fake websites on the internet, just copy one of these serial keys and then paste on your LR Installer.
If your Lightroom is version 2.2, then you should go here. CLICK HERE.

1160-4619-1417-8842-6759-2138

1160-4723-6958-7923-6859-1510

1160-4609-3626-9982-2935-8664

1160-4601-9792-2555-6085-0047

1160-4240-4495-6746-8069-4609

1160-4923-0464-9984-3996-3745

1160-4186-2901-3414-2501-5012

1160-4930-4699-9173-5530-8637

Sharing is so Easy:

Nowadays, there are lots of ways suggested by your friends to bring back the old chat in facebook such as using javascript, visiting a php site of facebook itself and so forth. But there is only one way to bring it back, and I assume that this is the most effective method. In this manner, if you are using
-->Mozilla Firefox, click here.

-->Google Chrome, click here.

-->Opera, click here.

As for me, I am using Firefox, so if you are using such browser too, just click the button ADD TO FIREFOX and let it be installed. :)


PS: This is proven by me already. If it does not work, you may condemn me. :)
God Bless

Sharing is so Easy:

Read:
This is all about my help letter which I was supposed to submit to google online forum.

I need help As soon as possible I need to get rid this problem of mine. I was just fixing my subdomains. I added www.forum in the hostname in eNOM and ghs.google.com. in my address. and I added a new subdomain which is www.photos. and lastly I added photos and forum in the hostname with same addresses...


check this out:
my main address is or blog: www.glennvon.com
my two subdomains:

www.photos.glennvon.com ->for my portfolio (IT IS OKAY)
www.forum.glennvon.com -> at first it was ok and then ughh! It was broken like in my main address.

I checked all possible solutions and in my dashboard in blogger says that "YOUR BLOG IS READY!" which means everything is fine, but then ugh! Nothing is fine. :(

check this photo. It is all about my settings in eNom.

Sharing is so Easy:

How to take photos of fireworks easily?

Here's what you need:

That's All People!

Sharing is so Easy:

Would Jesus see movies?
By Pastor Emil L. Galang and the KKB Core Leaders

Evil places

Christian maturity

Obviously bad movies

Now, there are movies which determination of whether or not Christians should see can be handled by sheer common sense. Bruno, American Pie, Death Note and Harry Potter should not send us fasting just to hear from God if it’s ok to see them. There is already enough common knowledge about the negativity of their plot available on the internet.

The challenge

Sharing is so Easy:

article by: glenn posadas

.co.cc is a free domain for us bloggers and website makers.
Now, many of you encounters an error if you visit for example my website: www.glennvon.com without a "www". It is because of your DNS Settings in .co.cc

Follow these simple steps:

Sharing is so Easy:

So, What are the Real CD-Keys for Adobe Photoshop Lightroom 2.2?
If you search or google it, you will probably find many hack websites, malicious sites, fake websites that will ask you to take a survey first before you can download a serial-key or a key-generator or a crack.

        1160-4444-1528-8663-9578-1194

        1160-4449-3647-0116-3486-4402

        1160-4440-8038-0413-2945-1082

        1160-4449-7790-0612-6987-7557

        1160-4447-5329-8655-4206-5345

        1160-4441-4618-1106-7934-7465

Sharing is so Easy:

Do you want to Learn C programming like ABC? well, just follow this steps.1. Download any C compiler like Dev C++ (click here to download Dev C++ compiler2. Stay here on teachme-online.blogspot.com Alright! If you already have a C compiler, we shall make our first C program.Now, open your compiler and type this.#include <stdio.h>#include <conio.h>main(){ printf("Hi! This is my first C program! hehe");getch();}I would like to explain the fragment of our first C program. First of all, what is that #include thing?#include means you want to include a header. Header is a file that has an extension of .h. Example of a header is the stdio and the conio. The stdio.h is a header which means standard input output and the conio.h is a header that allows our compiler to read the getch(); function. Our main function in this program is the main() Our codes are putted inside the main function. Which is the printf("Hi! This is my first C program! hehe");The printf(" "); is a function which means to print out or output any numbers of phrases.Later, on our second tutorial, we shall know the second important function. The scanf(); function. Now, what is the use of ; ? That semi-colon means our terminator which means it terminates our printf function and our getch function.//End of our 1st Discussion.//Click here to go to the 2nd Discussion.

Sharing is so Easy:

Where to download softwares?

FileHippo is an internet download site. It offers freeware as well as shareware. It also offers the FileHippo Update Checker, a small program that scans your computer for installed software from the FileHippo site and suggests available updates for it. According to Quantcast, it receives more than two million US visitors each month and as of June 2009, Alexa lists filehippo in the top 1000 most visited websites.

This website is great. Download anything you want without getting worried. Download messengers, anti-virus, internet browsers and many more.
Just go to http://filehippo.com

Sharing is so Easy:

Here is the download link:
(note: you need to register first)

CLICK HERE

anyways, here is the code for that program:


/******************************************GRADES*****************************
****************************************COMPUTER******************************
***************************************PROGRAM BY GLENN***********************
***********************************www.teachmeonline.co.cc********************/

#include <iostream.h>
#include <conio.h>
#include "allmyfunc.cpp"
#include "gradesProject.cpp"
#include <windows.h>
using namespace std;

void projmain(void);
//setcolor to 15 for white
main()
{
setcolor(140);
cout<<"\t\t\t\t\t\t\t\t\t [x] ";
setcolor(11);
cout<<endl<<endl<<endl<<"\n\n\t\t";

cout<<" ______ ______ _______ ______ _______\n";
cout<<"\t\t | ____ |_____/ |_____| | \\ |______\n";
cout<<"\t\t |_____| | \\_ | | |_____/ |______\n";

cout<<'\n';
setcolor(10);
cout<<"\t _______ _____ _______ _____ _ _ _______ _______ ______\n";
cout<<"\t | | | | | | |_____] | | | |______ |_____/\n";
cout<<"\t |_____ |_____| | | | | |_____| | |______ | \\_\n";
setcolor(143);

cout<<"\n\t\t\t Program by: Glenn Posadas ";

setcolor(95);
cout<<"\n\n\n\n\t\t\tPress Any Key to Continue... ";
setcolor(15);
char x;
x = getche();
if(x=='x') return 0;
/*loading*/
clrscr();
cout<<"\n\n\n\n\n\t\t\t\tLoading Database...";
cout<<"\t\t\t";
gotoxy(3,9);
printf("\t\t\tÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»");
gotoxy(3,10);
printf("\t\t\tº°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°º");
gotoxy(3,11);
printf("\t\t\tÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ");

for(int k=25;k<58;k++)
{
Sleep(10);
gotoxy(k,10);
printf("±");
}
//call for main project
projmain();
getch();
}


cheers! glenn

Sharing is so Easy: